 |
| |
| |
 |
| |
| |
| POLYACETAL
(POM) |
Thermal plastic with a weight mass of approx. 1.4
grams/cm 3.
Suitable for use in both warm and cold areas.
Temperature range from - 43°C to + 95°C.
Has a limited resistance to certain chemicals.
(Contact Us)
FDA approved.
Consistently stable material with high tensile strength
Low friction between belt and support.
Low impact resistance at low temperatures. |
|
| |
| |
| POLYACETAL
ANTISTATIC |
Thermal plastic with a weight mass of approx. 1.4
grams/cm 3.
Suitable for use in areas requiring electrical diversion.
Temperature range from - 43°C to + 95°C.
Other characteristics are the same as polyacetal.
|
|
| |
| |
| POLYETHYLENE |
Thermal plastic with a weight mass of approx. 0.92
grams/cm3 .
Suitable for use in cold areas.
Temperature range from - 73°C to + 66°C.
High chemical resistance.
FDA approved.
Tough yet flexible material with high impact strength.
|
|
| |
| |
| POLYETHYLENE
PLUS |
Thermal plastic with a weight mass of approx. 0.92
grams/cm 3.
Suitable for use in medium temperature areas.
Temperature range from - 20°C to + 80°C.
High chemical resistance.
FDA approved.
Same characteristics as Polyethylene, with a
30% larger tensile strength as well as reduced impact
strength. |
|
| |
| |
| POLYPROPYLENE |
Thermal plastic with a weight mass of approx. 0.92
grams/cm3.
Suitable for use in high temperature areas.
Temperature range from + 5°C to + 100°C.
High chemical resistance.
FDA approved.
A strong material with a medium tensile strength and
low impact
strength at low temperatures. |
|
| |
| |
| POLYPROPYLENE ANTISTATIC |
Thermal plastic with a weight mass of approx. 0.98 grams/cm
3.
Suitable for use in areas requiring electrical diversion.
Temperature range from + 5°C to + 100°C.
High chemical resistance.
Tensile strength as normal polypropylene. |
|
| |
| |
 |
| |
| |
| |
| |
| |
| |
| |
| |
| |
This page is
best viewed at a resolution of |
| |
 with
|
|
| |
| |
Copyright
© 2000 by P.B.A. Industrial Supplies Ltd and
Scanbelt A/S
| |
|
|
